احدث اصدار من برنامج PassMark WirelessMon 4.0.0 build 1007+ KEYGEN لادارة شبكات الويرليس ومعرفة مايحدث عليها

تاريخ التسجيل : 13/04/2012

[size=21]
[size=25]احدث اصدار من برنامج PassMark WirelessMon 4.0.0 build 1007 KEYGEN لادارة شبكات الويرليس ومعرفة مايحدث عليها [/size][/size]

[size=21]
[/size]

[size=21]
[/size]

[size=21]
برنامج PassMark WirelessMon من اقوى البرامج التى
تمكنك من معرفة ومشاهدة بيانات الشبكة الشبكة لمستخدمين الانترنت ورصد
النطاق الترددي الخاص بكل بيانات الشبكة حيث يقوم البرنامج بتحسين عملية
نقل البيانات ويتمكن من تحقيق أعلى سرعة ممكنة ،،البرنامج يدعم العديد من
الاتصالات و يدعم العديد من الشبكات الكابل والشبكة الرقمية الوير ليس IE
HTTP Analyzer ،،البرنامج سهل التعامل معه وحجمه خفيف جدا فلايسبب اى مشاكل
عند التثبيت وغير ذلك من المميزات ويتوافق مع جميع اصدارات الويندوز
Windows 2000/XP/Vista/7 [/size]

[size=21]
برنامج جد متميّز للتحكّم في اتصالات الـWIFI و يساعدك في القيام بالاعدادات الصحيحة.[/size]
[size=21]
- يقوم بالتأكّد من صحّة اعدادات شبكة 802.11[/size]
[size=21]
- يختبر معدّات الـWIFI و تعريفاته للقيام بالتعديلات اللازمة و ضمان حسن تشغيلها.[/size]
[size=21]
- يبحث عن أحسن مستوى للاشارة الصادرة عن شبكة الاتصال القريبة و البعيدة.[/size]
[size=21]
- يمكّنك من تحديد مصادر التضارب ان وجدت.[/size]
[size=21]
- يقوم بانجاز خريطة اتصال في منطقة الاتصال[/size]
[size=21]
- متوافق مع GPS[/size]
[size=21]
- يساعد على تحديد مساحة و درجة التغطية[/size]
[size=21]
بالاضافة الى عديد المزايا الأخرى[/size]
[size=21]
================[/size]

[size=21]
Version 4.0 is now available, see what's new for more information[/size]

[size=21]
WirelessMon is a software tool that allows users to monitor the status
of wireless WiFi adapter(s) and gather information about nearby wireless
access points and hot spots in real time. WirelessMon can log the
information it collects into a file, while also providing comprehensive
graphing of signal level and real time IP and 802.11 WiFi statistics.[/size]

[size=21]
Verify 802.11 network configuration is correct.[/size]
[size=21]
Test WiFi hardware and device drivers are functioning correctly.[/size]
[size=21]
Check signal levels from your local WiFi network and nearby networks.[/size]
[size=21]
Help locate sources of interference to your network.[/size]
[size=21]
WirelessMon supports the MetaGeek Wi-Spy (2.4i, 2,4 x e DBx) useful for
finding interference from non 802.11A/B/G/N devices transmitting on the
same frequencies[/size]
[size=21]
Scan for hot spots in your local area (wardriving)[/size]
[size=21]
Create signal strength maps of an area (also known as heat maps)[/size]
[size=21]
GPS support for logging and mapping signal strength[/size]
[size=21]
Mapping can be performed with or without a GPS unit[/size]
[size=21]
Correctly locate your wireless antenna (especially important for directional antennas).[/size]
[size=21]
Verify the security settings for local access points.[/size]
[size=21]
Measure network speed & throughput and view available data rates.[/size]
[size=21]
Help check Wifi network coverage and range[/size]
[size=21]
A feature-rich, value-for-money alternative to NetStumbler.[/size]

[size=21]
Compatibility[/size]

[size=21]
Any wireless adapter complies with the NDIS_802.11 should be able to
report information to WirelessMon. Note that only Windows XP, 2003,
Vista & Win7 support this software. Windows 95, 98 and NT are not
supported. Windows 2000 (Service pack 4 and above) may work but is not
actively supported.[/size]

[size=21]
All the various IEEE 802.11 standards are supported, including 802.11a,
802.11b and 802.11g. 802.11N is supported to the extent provided by
Windows, as the draft becomes a completed standard more 802.11N support
should become available. Some features may not be supported by some
wireless adapters, typically they will report only partial information
in this case. It has been also been noted that several wireless adapter
manufacturers are not providing device drivers that are fully Windows
compliant.[/size]

[size=21]
From version 4 Garmin USB GPS devices are supported via USB connection.[/size]

[size=21]
Wireless LAN information[/size]

[size=21]
The following wireless LAN information is displayed by WirelessMon (when
available, as not all wireless adapters will support all of these
features).[/size]

[size=21]
Current connection information: SSID; Connected access point MAC
address; Signal strength; Tx Power; Authentication type; RTS Threshold;
Fragmentation Threshold; Channel in use; Frequency being used; Number of
Antennas; Beacon Period; ATIM Window; Dwell Time; Hop Pattern; Hop Set.[/size]

[size=21]
Statistics information: More than 30 parameters are reported. Including a
detailed break down of frames sent and received, error counts,
transmission retry counters and related low level data.[/size]

[size=21]
IP information: Information about the current TCP/IP connection is
reported. Including the adapter MAC address; Adapter device driver name;
the IP Address; Subnet Mask; if DHCP is enabled; the Gateway Address
and the DHCP server IP address.[/size]

[size=21]
IP counter information: Network throughput is monitored and displayed.
This includes the maximum bandwidth available from the network adapter
hardware, the current send and receive data rates in bytes per second
and packets per second, plus error counters[/size]

[size=21]
================[/size]

[size=21]
Operating System: Windows 2000/XP/Vista/7[/size]

[size=21]
================[/size]

[size=21]
[/size]

[size=21]
Main Window with MetaGeek Wi-Spy: This shows the signal level is quite
high on channel 1 even though there are no access points, the culprit
appears to be a wireless video camera in an adjacent office.[/size]

[size=21]
[/size]

[size=21]
The map window[/size]

[size=21]
[/size]

[size=21]
The graph window[/size]

[size=21]
[/size]

[size=21]
Animated GIF of 7 access points and their combined signal strength map[/size]

[size=21]
[/size]

[size=21]
The Mini Window[/size]

[size=21]
The WirelessMon window can be reduced to a 'Mini window" that appears as a overlay in the top right corner of your screen[/size]

[size=21]
[/size]

[size=21]
================[/size]

[size=21]
ساشرح كيفيه تركيب الكيجن لاهميه الموضوع ليصبح البرنامج كامل ان شاء الله :-[/size]

[size=21]
[/size]

[size=21]
بعد تسطيب البرنامج ستخرج لنا نافذه التسجيل ...نتركها ونفتح الكيجن المرفق ...[/size]

[size=21]
1-نكتب اسم التسجيل الذي نرغب بالتسجيل به ...[/size]

[size=21]
2-نضغط patch[/size]

[size=21]
3-نحدد البرنامج ونضغط open [/size]

[size=21]
4-نضغط generate [/size]

[size=21]
5-نقوم بنسخ اسم التسجيل والكود باسفله كما هو واضح بالصوره [/size]

[size=21]
6-نلصق ماقمنا بنسخه في نافذه التسجيل الخاصه بالبرنامج ونضغط continue وتم
التسجيل والنسخه كامله والحمدالله واضغط بالنهايه موافق ...[/size]

[size=21]
وهذا لاثبات كمال الاصدار باسم المنتدى :-[/size]

[size=21]
[/size]

[size=21]
Instructions[/size]

[size=21]
1. Unpack & Install.[/size]
[size=21]
2. Run keygen.[/size]
[size=21]
3. Patch the software.[/size]
[size=21]
4. Generate a valid key![/size]
[size=21]
5.Enjoy[/size]